Click for Abeking Click for Comfort Click for Mag Bay Click for Walker Click for Furuno

Aft Deck Project: 1968 37' Roamer

Discussion in 'Chris Craft Roamer Yacht' started by lacabina, Nov 14, 2009.

  1. lacabina

    lacabina Member

    Joined:
    Dec 3, 2004
    Messages:
    40
    Location:
    woodstock georgia
    Last week I removed the 41 year old Nautolex. The deck below was in amazing condition. I had only 2 small areas of decay on the starboard side plywood deck. I removed the entire section, lots of screws. Now I will replace the piece with new plywood using the old as a template. All of the stringers are in like new condition. My question is this. What plywood did Chris Craft use in 1968? Was it just marine plywood or was it another wood. Mahogoney?
    Now that I have a huge open section any suggestions as to preventative maintenance? I have already replaced the exhaust hoses.
    Thanks
  2. Savasa

    Savasa Senior Member

    Joined:
    Jun 4, 2008
    Messages:
    167
    Location:
    Iqaluit, Nunavit, Canada
    Greetings,
    It is my understanding that CC used a mahogany marine ply. As for preventive maint`, would it be possible during your rebuild to affix the new decking in such a fashion as to allow you to easily remove it in case of future servicing. IE: build in some sort of hatch.
    Peter
  3. q240z

    q240z New Member

    Joined:
    Oct 24, 2007
    Messages:
    285
    Location:
    zsedr
    I would think that any marine rated plywood would work fine.