YachtForums.Com - View Single Post - Is an Angular Thru hull fitting available?

K1W1 · 05-26-2008, 05:56 AM

Hi,

You should be able to get a boat yard to weld in a pipe that you can use to mount the FLS in the space you say you have. No part of this needs to protrude below the hull so you can still ground the boat.

Welding close to a full Diesel tank is a lot safer than welding next to an empty one or a gas tank.

On another note have you ever considered a transom setup for your sonar?

05-26-2008, 05:56 AM	#6
K1W1 Senior Member Join Date: Sep 2005 Location: My Office Posts: 1,274	Hi, You should be able to get a boat yard to weld in a pipe that you can use to mount the FLS in the space you say you have. No part of this needs to protrude below the hull so you can still ground the boat. Welding close to a full Diesel tank is a lot safer than welding next to an empty one or a gas tank. On another note have you ever considered a transom setup for your sonar? __________________ Cheers, K1W1