Originally Posted by 61c40
I believe the top hose in the picture is the high pressure side he commented in post #7 that the stove is on the other side of the bulkhead that would make the low pressure side the bottom hose going thru the bulkhead fitting as seen in his picture in post#3 The hole system looks like an insurance claim to me
I wouldn't want it on any vessel I was involved in
Correct, hose on top side is coming from the tank, hose down below comes from the regulator and is fed trough a grommet in the bulkhead to the stove on the other side.
Your comments are taken but could you explain why this set-up looks like an insurance claim to you and why you wouldn't want to have it on any vessel you were involved in please?